Glass can be one of the most difficult substrates to paint. Unless it is properly primed, top coats simply won’t adhere to it. Start the job right with Bulls Eye® 1-2-3.
Ensure the surface is free from any contaminants and anything that could interfere with adhesion then degrease overall with methylated spirit frequently changing the cloth. Remove all visible signs of organic growth and treat the areas with Zinsser Mould Killer in accordance with the manufacturer’s instructions. Allow to dry.
Prime overall with one full coat of Bulls Eye® 1-2-3 Primer Sealer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 1 hour in normal drying conditions.
Decorate with two full coats of Perma-White® Interior Matt, Satin or Semi-gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of two hours between coats. For exterior projects decorate with two full coats of AllCoat® Exterior Satin or Gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of one hour between coats.
@ZinsserUK
