How to paint woodstained or varnished surfaces

How To Paint Woodstained or varnished surfaces
What you will need:

Varnished surfaces do not provide a key for everyday decorative paints. This method explains how to prime and seal in one.

Surface Preparation

All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or by the use of a hot air stripper to a sound edge. Feather sound edges with a fine grade abrasive paper. Prior to painting, the moisture content should not exceed 18%. Remove all dust.Remove all visible signs of organic growth and treat the areas with Blackfriar Anti-Mould Solution in accordance with the manufacturer’s instructions. Allow to dry.

For any areas with remaining sound paint wash with hot water and liquid detergent solution to remove any contaminants, frequently changing the water. Rinse thoroughly with clean water to remove all residues. Allow to dry. Degrease thoroughly with methylated spirit, changing cloths regularly. Ensure all silicone polish/wax is removed. Fill any cracks and small surface defects with Ready Patch™ or Ready Patch™ Lite in accordance with the manufacturer’s instructions. Allow to dry.

Rub down with a fine grade abrasive paper. Remove all dust.


Prime all areas to be decorated with one full coat of B-I-N® Primer Sealer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 45 minutes in normal drying conditions.


Decorate with two full coats of Perma-White® Interior Eggshell, Satin or Semi-Gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of two hours between coats.

Note: It is recommended to stripe coat edges to promote adhesion.