×
Products How To Stockists Case Studies Blog About Us Specification Service Technical Support Contact
Home > How To > How to paint over water stains (odourless method)

How to paint over water stains (odourless method)

Want create site? Find Free WordPress Themes and plugins.

In this guide we explain how to paint over water stains on internal walls and ceilings using odourless Zinsser AllCoat primer and finish.

Did you find apk for android? You can find new Free Android Games and apps.

Steps

1. Surface Preparation

All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or brushing with a stiff bristle brush to a sound edge. Feather sound edges with a fine grade abrasive paper. Prior to painting, the moisture content should not exceed 18%. Remove all dust. Remove all visible signs of organic growth and treat the areas with Zinsser Mould Killer in accordance with the manufacturer’s instructions. Allow to dry. In areas with remaining sound paint clean down with Zinsser Universal Cleaner & Degreaser to remove any contaminants. Rinse thoroughly with clean water to remove all residues. Allow to dry. Fill any cracks and small surface defects with a suitable filler as appropriate in accordance with the manufacturer’s instructions. Allow to dry. Rub down with a fine grade abrasive paper. Remove all dust.

2. Patch priming and bring forward / Priming

Patch prime all bare and filled areas with one coat of AllCoat (Solvent Based) Primer and Finish in accordance with the manufacturer’s instructions. Allow a minimum drying time of 2 hours in normal drying conditions. Bring forward patch primed areas with AllCoat (Solvent Based) Primer and Finish. Allow to dry. Prime all areas to be decorated with one full coat of AllCoat (Solvent Based) Primer and Finish. Allow a minimum drying time of 2 hours in normal drying conditions.

3. Decoration

Decorate with one full coat of AllCoat (Solvent Based) Primer and Finish in accordance with the manufacturer’s instructions.

Find a Stockist

To find your nearest stockist please enter your postcode below

Latest blog posts

  • Tor Coatings
  • Portobello Industrial Estate
  • Birtley
  • County Durham
  • DH3 2RE
  • UK
Zinsser ©. All Rights Reserved