How to paint plastisol

plastisol
What you will need:

Perma-White® offers outstanding adhesion and a washable finish for this difficult to paint substrate.

1
Surface Preparation / Sealing

All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or brushing with a stiff bristle brush to a sound edge. Feather sound edges with a fine grade abrasive paper. Remove all visible signs of organic growth and treat the areas with Blackfriar Anti-Mould Solution in accordance with the manufacturer’s instructions. Allow to dry. For any areas with remaining sound paint wash with hot water and liquid detergent solution to remove any contaminants, frequently changing the water. Rinse thoroughly with clean water to remove all residues. Allow to dry.

2
Priming

Prime with one full coat of Bulls Eye® 1-2-3 Plus Primer Sealer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 1 hour in normal drying conditions.

3
Decoration

For interior projects decorate with two full coats of Perma-White® Interior Eggshell, Satin or Semi-Gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of two hours between coats. For exterior projects decorate with two full coats of Perma-White® Exterior Satin or Semi-Gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of two hours between coats.